Environmental Considerations for Drone Cinematography

Close range aerials can be obtained in a wide variety of wind, weather and lighting conditions with the quality of the final footage being directly proportional to the severity of the conditions present. Obviously the best results will most often be achieved in near perfect conditions. The problem here is that we must work around mother natures schedule and not the reverse. Whether or not acceptable results can be obtained when the conditions are less than ideal is primarily dictated by the type and quality of platform employed, camera gimbal stabilization and the flying skills of the operator.

Wind
At present, most outdoor Helicam demo reel footage of acceptable quality will almost always have been shot with little or no wind present. For a single rotor platform, when significant winds are present, the best footage is usually obtained flying head on into the wind verses perpendicular to it for example. The winds direction is always an important consideration when planning each shot, for not only shot quality, but also approach planning in case an autorotation is required in the event of an emergency. Autorotation is the unique ability of a single rotor helicopter to maneuver and land without power. To consistently acquire usable footage in winds above 10 mph at this point in time,  a large single rotor aircraft weighing at least 30 lbs. fully fitted with camera and other needed accouterments is required. In addition to needing this larger mass for overall stability, a well-tuned, gyro-stabilized camera gimbal is also required. The associated cost, complexity and skill required to fly and maintain these larger aircraft quickly narrows down the number of potential sources however.

Precipitation
If properly designed and installed components are used, it is not an issue to perform flight operations in light mist, rain and snow. Since the camera/platform is usually required at some point to engage in forward flight, precipitation typically becomes more of an issue of keeping moisture off the camera lens than creating an operational problem for the aircraft and/or operator.

Lighting
The quality of lighting (brightness) and overall visibility (lack of fog/haze) present has a direct bearing on the range or distance the helicopter can safely be flown from the pilot via "line of sight" during daylight operations. The position of the sun relative to the pilots viewpoint must also always be considered when laying out each shot. The aircraft must never be flown in a path that requires the pilot to look directly into the sun if possible. Shadows are another important consideration when shots are obtained from an aerial view. Things always look a bit different from above and shadows can quickly creep in a ruin an otherwise good take. In many cases there is ample time in a given day to film a large number of shots but the optimum window of opportunity for best lighting for each individual location is often very brief. Because of this, proper shot scheduling/planning for the lighting conditions is critical.


Flight operations during dusk, dawn and dark conditions are also possible using high intensity LED lighting systems on the aircraft. The range of operations using such lighting systems is very similar to that of daylight operations. The flight path must be carefully scoped out during the day in order to prevent collision with objects extending upward such as power lines and structures. Just as the suns position must be accounted for during daylight operations, the position of bright lights must also be taken into consideration during nighttime operations.

Dust and Dirt
A helicopter is a precision flying machine and so dust and dirt are its enemy. There are several techniques that are available to mitigate this type of issue however when the location requires operation in sandy, dirty or dusty environments. In such conditions, the rotor downwash from the helicopters blades will kick up large amounts of particulate, which, if not abated, which will find its way to the cameras lens, not to mention many of the close tolerance mechanical parts of the machine.

To summarize, it is possible to obtain close range aerial footage that will mesh with the look and feel of the particular scene in question, provided certain considerations and plans are made to account for the various environmental conditions at hand at the time of shooting.

For more info please visit http://www.perfectperspectivesaerial.com